McMillan Model 10X Series Microturbine Flow Sensors
McMillan Model 10X Series Microturbine Flow Sensors
McMillan 10X Series Flow Sensors are capable of measuring extremely low flow rates. Units are available that measure gas flow as low as 20 mL/minute and as high as 500 L/minute. Liquid flow can be measured as low as 13 mL/minute and as high as 50 L/minute. Full scale accuracies of ±1.0% or better are available on select models.
A wide variety of liquids and gases may be measured. Repeatable results are achieved using a Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has earned a reputation for continuous operational service without failure.
Because of the compact size and affordable cost of these products, the 10X Series Flow Sensors are suitable for a wide variety of industrial, commercial, laboratory and OEM applications. Some examples include measurement of air, nitrogen, stack gases, hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, mild acids, alkalis, and deionized water. Several power and output configurations are available, including both pulse and analog outputs. NIST traceable certificates are available on most models.
FLOW RANGES
Units are available that measure gas flow as low as 20 mL/minute and as high as 500 L/minute. Liquid flow can be measured as low as 13 mL/minute and as high as 50 L/minute.
POWER
Most units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are also available for use with 12 VDC versions.
SIGNAL OUTPUTS
Some units may be ordered with a 0-5 VDC output, a pulse output, or with both. The Model 107 is only available with a 4-20 mA output, and the Model 106/106F/106S have multiple options.
ACCURACY/LINEARITY
All liquid models have a standard accuracy specification of ±1% F.S. including linearity. An improved accuracy specification of ±0.5% is available on some liquid models. NIST traceable calibration certificates are standard for improved accuracy (“H”) models and optional for standard units. All gas models have a standard accuracy specification of ±3% F.S. including linearity.
FLUID CONNECTIONS
Units feature either tube fittings or male integrated flare fittings, depending upon the model. Many alternate fitting types and sizes may be selected as noted in the Fitting Availibility Chart for each model.
ELECTRICAL CONNECTIONS
Models 100/101/102/104/107 have an integrated 4-pin male connector. To complete connections, either a cable assembly or power adapter should be ordered. Units where the circuit board has been epoxy potted for increased chemical resistance feature an integrated cable with pigtail leads. Models 106/106F/106S have an integrated cable with pigtail leads.
DISPLAYS
McMillan has a comprehensive range of flow meters with integrated displays. A variety of remote displays are also available for use with any flow sensor and flow meter.
.png)
